top of page
 The machine is used for punching formats from corrugated board using a round (rotary) die. 
 
 A chain cardboard feeder was used. The rollers can be extended by 40 mm. Automatic adjustment of the feeder speed to the linear speed of the shafts. On request it is possible to make a roller cardboard feeder with air suction. In addition, the machine has sliding slots for punching flap box formats without using a punch . 
 
 For more efficient cleaning of the blanks made, we recommend buying a waste shaker . 
 
 Do you want to buy this machine? Contact us!

Rotary punching machine with the function of MZC WRSL 2514 slotter

  • TECHNICAL DESCRIPTION

    TECHNICAL DESCRIPTION (for the whole machine)

    1. A machine for cutting out blank patterns from cardboard using rotary blanking dies. In addition, sliding and spacing gaps for the production of fefco boxes 200 - 203 and 300 - 306 (flap and lid) are installed

    2. Maximum dimensions of the mat - 2470 x 1450 mm

    3. Minimum dimensions of the mat - 500 x 350 mm

    4. Pressure roller still floating +/– 30 mm (the system ensures even wear of the lining over the entire length)

    5. The length of the cladding shaft (thrust) - 2360 mm

    6. The pressure shaft turning mechanism is mounted

     

    TECHNICAL DESCRIPTION (regarding the slot function)

    1. Maximum slot format - 2370 x 1450 mm

    2. The length of the slots mounted on the rotation - 350 mm

    3. Joint width - 7 mm

    4. The minimum size of the flap box - 260x 60 x 40 mm

    5. Maximum height of the flap box - 450 mm

    6. 2 sets knives to cut the form

    7.4 kpl. creases


    TECHNICAL DESCRIPTION (for punching with a rotary die)

    1. Shaft length for mounting the blanking die (slots removed) 2300 mm

    2. Shaft length for mounting the die without removing the 1640 mm gaps

    3. Shaft diameter for mounting the punch - 434 mm

    4. Hole spacing for punching dies - 100 x 75 mm

    5. Mounting screws - M 10

bottom of page